Model: 39712
Tap wrench is made by cold stamping method.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
3.58€
Ex Tax:3.58€
Model: 39737
Tap wrench is made by cold stamping method.
Has a swivel head and a spring-loaded retaining ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
3.61€
Ex Tax:3.61€
Model: 39664
Used to restore the functionality of the mechanism of the ratchet with 72 teeth.
Contains a complete set of the ratchet mechanism.
The drive sprocket and mechanism flags are made of tool steel alloyed with chrome and molybdenum.
Wear-resistant, suitable for long-term use at max loads...
3.66€
Ex Tax:3.66€
Model: 39664
Used to restore the functionality of the mechanism of the ratchet with 72 teeth.
Contains a complete set of the ratchet mechanism.
The drive sprocket and mechanism flags are made of tool steel alloyed with chrome and molybdenum.
Wear-resistant, suitable for long-term use at max loads...
3.66€
Ex Tax:3.66€
Model: 39716
Tap wrench is made by cold stamping method.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
3.71€
Ex Tax:3.71€
Model: 39703
• Tap wrench head is made by the cold stamping method and equipped with a spring-loaded retaining ball.
• Material - chrome-vanadium tool steel CrV50BV30.
• It is hardened to hardness not less than 39HRC.
• It is chrome plated and matt finish to resist corrosion...
4.19€
Ex Tax:4.19€
Model: 39700
Tap wrench is made by cold stamping method.
Has a swivel head and a spring-loaded retaining ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
4.29€
Ex Tax:4.29€
Model: 39702
• Tap wrench head is made by the cold stamping method and equipped with a spring-loaded retaining ball.
• Material - chrome-vanadium tool steel CrV50BV30.
• It is hardened to hardness not less than 39HRC.
• It is chrome plated and matt finish to resist corrosion...
4.74€
Ex Tax:4.74€
Model: 39639
Tap wrench is made by cold stamping method.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
Wear-resistant, suitable for the long-term usage at max loads.
It is chrome plated and matt finish to resist c..
4.75€
Ex Tax:4.75€
Model: 39539
Tap wrench is made by cold stamping method.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
5.19€
Ex Tax:5.19€
Model: 39742
Mechanism with 72 teeth allows to rotate by 5 degree minimum angle.
Equipped with a flag switch, a quick-reset button and a holding ball.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
Has a bended handle for ease of use.
It is chrome plated and mat..
5.45€
Ex Tax:5.45€
Model: 39742
Mechanism with 72 teeth allows to rotate by 5 degree minimum angle.
Equipped with a flag switch, a quick-reset button and a holding ball.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
Has a bended handle for ease of use.
It is chrome plated and mat..
5.45€
Ex Tax:5.45€