Model: 39641
Tap wrench is made by cold stamping method.
Has a swivel head and a spring-loaded retaining ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
Wear-resistant, suitable for the long-term usage at max loads.
It is chrome plated and matt finish t..
11.96€
Ex Tax:11.96€
Model: 39482
Mechanism with 72 teeth allows to rotate by 5 degree minimum angle.
Equipped with a flag switch, a quick-reset button and a holding ball.
Made by cold stamping method.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finis..
12.49€
Ex Tax:12.49€
Model: 39545
Mechanism with 45 teeth allows turning with 8 degrees minimum angle.
Equipped with a flag switch, a quick-reset button and a holding ball.
Made by cold stamping method.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt fini..
12.56€
Ex Tax:12.56€
Model: 39715
Tap wrench is made by cold stamping method.
Has a swivel head and a spring-loaded retaining ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
14.55€
Ex Tax:14.55€
Model: 39642
Tap wrench is made by cold stamping method.
Has a swivel head and a spring-loaded retaining ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
Wear-resistant, suitable for the long-term usage at max loads.
It is chrome plated and matt finish t..
15.55€
Ex Tax:15.55€
Model: 39674
Mechanism with 72 teeth allows to rotate by 5 degree minimum angle.
Equipped with a flag switch, a quick-reset button and a holding ball.
Telescopic rod design with a lock.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt ..
17.94€
Ex Tax:17.94€
Model: 40743
Tap wrench is made by cold stamping method.
Equipped with a spring-loaded holding balls.
Material - chrome-molybdenum steel CrMo.
It is hardened to hardness not less than 39HRC.
Wear-resistant, suitable for the long-term usage at max loads.
Protected from corrosion by chemical oxidation...
19.60€
Ex Tax:19.60€
Model: 39599
• Mechanism with 72 teeth allows to rotate by 5 degree minimum angle.
• Equipped with a flag switch, a quick-reset button and a holding ball.
• Ratchet design allows to use the wrench in hard-to-reach places.
• Telescopic rod design with a lock.
• Material - chrome-vanadium steel CrV50BV30.
• ..
20.38€
Ex Tax:20.38€
Model: 39643
Tap wrench is made by cold stamping method.
Has a swivel head and a spring-loaded retaining ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
Wear-resistant, suitable for the long-term usage at max loads.
It is chrome plated and matt finish t..
23.02€
Ex Tax:23.02€