Model: 39534
Made by the method of cold stamping.
Equipped with a spring-loaded retaining ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39 HRC.
Protected from corrosion by chrome plating with matt surface effect...
2.87€
Ex Tax:2.87€
Model: 40025
Made by cold stamping method.
It is used with pneumatic tool.
Equipped with a spring-loaded holding ball.
Material - chrome-molybdenum tool steel.
Protected against corrosion by phosphatizing...
3.25€
Ex Tax:3.25€
Model: 39776
Flexible design allows to use an extension in limited space.
Made by cold stamping method.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
4.11€
Ex Tax:4.11€
Model: 39536
Made by the method of cold stamping.
Equipped with a spring-loaded retaining ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39 HRC.
Protected from corrosion by chrome plating with matt surface effect...
4.71€
Ex Tax:4.71€
Model: 39507
Made by cold stamping method.
Square drive shape allows to rotate the fastener at an angle up to 15 °.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corro..
5.00€
Ex Tax:5.00€
Model: 39625
Made by cold stamping method.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
5.25€
Ex Tax:5.25€
Model: 39504
Made by cold stamping method.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
5.52€
Ex Tax:5.52€
Model: 40174
Designed for using with a pneumatic impact tool.
Made by hot stamping (forging hammers).
Equipped with a spring-loaded retaining ball.
Socket material - chrome-molybdenum steel.
Has a hardness 42 HRC.
Protected against corrosion by phosphatizing...
5.89€
Ex Tax:5.89€
Model: 40174
Designed for using with a pneumatic impact tool.
Made by hot stamping (forging hammers).
Equipped with a spring-loaded retaining ball.
Socket material - chrome-molybdenum steel.
Has a hardness 42 HRC.
Protected against corrosion by phosphatizing...
5.89€
Ex Tax:5.89€
Model: 370114
Professional impact universal swivel adapter for use with a 1/2" impact wrench or ratchet drive wrench.
Total length 63.5 mm.
Full 360° rotation for access to hard-to-reach areas and locking hole for added safety...
6.25€
Ex Tax:6.25€
Model: 40173
Designed for using with a pneumatic impact tool.
Made by hot stamping (forging hammers).
Equipped with a spring-loaded retaining ball.
Socket material - chrome-molybdenum steel.
Has a hardness 42 HRC.
Protected against corrosion by phosphatizing...
7.33€
Ex Tax:7.33€
Model: 40033
Made by cold stamping method.
It is used with pneumatic tool.
Equipped with a spring-loaded holding ball.
Material - chrome-molybdenum tool steel.
It has an additional hole for use as a wrench.
Protected against corrosion by phosphatizing...
13.00€
Ex Tax:13.00€