Model: 39527
Mechanism with 24 teeth allows to rotate by 15 degrees minimum angle.
Equipped with a flag switch and holding ball.
Made by hot stamping (forging hammers).
Material - chromium-molybdenum tool steel CrMo.
It is hardened to hardness not less than 39HRC.
Protected from corrosion by chemical oxidat..
19.22€
Ex Tax:19.22€
Model: 40743
Tap wrench is made by cold stamping method.
Equipped with a spring-loaded holding balls.
Material - chrome-molybdenum steel CrMo.
It is hardened to hardness not less than 39HRC.
Wear-resistant, suitable for the long-term usage at max loads.
Protected from corrosion by chemical oxidation...
19.60€
Ex Tax:19.60€
Model: 39526
Mechanism with 24 teeth allows to rotate by 15 degrees minimum angle.
Equipped with a flag switch and holding ball.
Made by hot stamping (forging hammers).
Material - chromium-molybdenum tool steel CrMo.
It is hardened to hardness not less than 39HRC.
Protected from corrosion by chemical oxidat..
21.20€
Ex Tax:21.20€
Model: 39526
Mechanism with 24 teeth allows to rotate by 15 degrees minimum angle.
Equipped with a flag switch and holding ball.
Made by hot stamping (forging hammers).
Material - chromium-molybdenum tool steel CrMo.
It is hardened to hardness not less than 39HRC.
Protected from corrosion by chemical oxidat..
21.20€
Ex Tax:21.20€
Model: 39643
Tap wrench is made by cold stamping method.
Has a swivel head and a spring-loaded retaining ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
Wear-resistant, suitable for the long-term usage at max loads.
It is chrome plated and matt finish t..
23.02€
Ex Tax:23.02€
Model: 39709
.
Equipped with a switch and retaining ball.
Made by hot stamping (forging hammers).
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
25.66€
Ex Tax:25.66€
Model: 39535
.
Equipped with a flag switch and holding ball.
Made by hot stamping (forging hammers).
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
Has a hole for the tap wrench with diameter 20 mm.
It is chrome plated and matt finish to resist corrosion...
25.85€
Ex Tax:25.85€
Model: 39530
.
Equipped with a flag switch and holding ball.
Made by hot stamping (forging hammers).
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
39.78€
Ex Tax:39.78€
Model: 39530
.
Equipped with a flag switch and holding ball.
Made by hot stamping (forging hammers).
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
39.78€
Ex Tax:39.78€
Model: 39529
.
Equipped with a flag switch and holding ball.
Telescopic rod design with a lock.
Made by hot stamping (forging hammers).
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
71.22€
Ex Tax:71.22€
Model: 39529
.
Equipped with a flag switch and holding ball.
Telescopic rod design with a lock.
Made by hot stamping (forging hammers).
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
71.22€
Ex Tax:71.22€