Model: 40030
Designed for using with a pneumatic impact tool.
6-point operating profile.
Square drive 1/2".
Made by the method of cold stamping.
Socket material - chrome-molybdenum steel.
Protected against corrosion by the chemical oxidation...
3.88€
Ex Tax:3.88€
Model: 39038
12-point sockets.
Made by the method of cold stamping.
Material - chrome-vanadium tool steel CrV50BV30.
Hardened to 45-47 HRC.
Protected from corrosion by chrome plating...
5.18€
Ex Tax:5.18€
Model: 39039
12-point sockets.
Made by the method of cold stamping.
Material - chrome-vanadium tool steel CrV50BV30.
Hardened to 45-47 HRC.
Protected from corrosion by chrome plating...
5.39€
Ex Tax:5.39€
Model: 39055
12-point sockets.
Made by the method of cold stamping.
Material - chrome-vanadium tool steel CrV50BV30.
Hardened to 45-47 HRC.
Protected from corrosion by chrome plating...
5.67€
Ex Tax:5.67€
Model: 39638
Tap wrench is made by cold stamping method.
Has a swivel head and a spring-loaded retaining ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
Wear-resistant, suitable for the long-term usage at max loads.
It is chrome plated and matt finish t..
5.99€
Ex Tax:5.99€
Model: 39243
6-point operating profile.
Made by the method of cold stamping.
Material - chrome-vanadium tool steel CrV50BV30.
Hardened to 45-47 HRC.
Protected from corrosion by chrome plating...
6.10€
Ex Tax:6.10€
Model: 40626
Intended for cutting damaged nuts.
Made of chrome-vanadium tool steel by the hot stamping method (forging hammers).
Hard alloyed cutting part.
Comes stored and orginized in a individual blister pack...
6.81€
Ex Tax:6.81€
Model: 40626
Intended for cutting damaged nuts.
Made of chrome-vanadium tool steel by the hot stamping method (forging hammers).
Hard alloyed cutting part.
Comes stored and orginized in a individual blister pack...
6.81€
Ex Tax:6.81€
Model: 39046
12-point sockets.
Made by the method of cold stamping.
Material - chrome-vanadium tool steel CrV50BV30.
Hardened to 45-47 HRC.
Protected from corrosion by chrome plating...
6.82€
Ex Tax:6.82€
Model: 39060
12-point sockets.
Made by the method of cold stamping.
Material - chrome-vanadium tool steel CrV50BV30.
Hardened to 45-47 HRC.
Protected from corrosion by chrome plating...
7.07€
Ex Tax:7.07€
Model: 39050
12-point sockets.
Made by the method of cold stamping.
Material - chrome-vanadium tool steel CrV50BV30.
Hardened to 45-47 HRC.
Protected from corrosion by chrome plating...
9.06€
Ex Tax:9.06€
Model: 39638
Tap wrench is made by cold stamping method.
Has a swivel head and a spring-loaded retaining ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
Wear-resistant, suitable for the long-term usage at max loads.
It is chrome plated and matt finish t..
10.36€
Ex Tax:10.36€