Model: 39502
Made by cold stamping method.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
1.88€
Ex Tax:1.88€
Model: 39506
Made by cold stamping method.
Square drive shape allows to rotate the fastener at an angle up to 15 °.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corro..
1.94€
Ex Tax:1.94€
Model: 39506
Made by cold stamping method.
Square drive shape allows to rotate the fastener at an angle up to 15 °.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corro..
1.94€
Ex Tax:1.94€
Model: 39752
Made by the method of cold stamping.
Equipped with a spring-loaded retaining ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39 HRC.
Protected from corrosion by chrome plating with matt surface effect...
2.02€
Ex Tax:2.02€
Model: 39773
Made by cold stamping method.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
2.05€
Ex Tax:2.05€
Model: 39604
Made by cold stamping method.
Square drive shape allows to rotate the fastener at an angle up to 15 °.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
Wear-resistant, suitable for long-term use at max l..
2.11€
Ex Tax:2.11€
Model: 39711
Made by hot stamping (forging hammers).
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
2.34€
Ex Tax:2.34€
Model: 39612
Made by cold stamping method.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
2.36€
Ex Tax:2.36€
Model: 39705
Made by cold stamping method.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
2.45€
Ex Tax:2.45€
Model: 39574
Made by hot stamping (forging hammers).
Equipped with a spring-loaded holding ball.
Equipped with a spring for ease of use in hard-to-rich places.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corro..
2.73€
Ex Tax:2.73€
Model: 39512
Made by hot stamping (forging hammers).
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
2.76€
Ex Tax:2.76€
Model: 40050
Made by cold stamping method.
It is used with pneumatic tool.
Equipped with a spring-loaded holding ball.
Material - chrome-molybdenum tool steel.
Protected against corrosion by phosphatizing...
2.80€
Ex Tax:2.80€