Model: 39728
Mechanism with 45 teeth allows turning with 8 degrees minimum angle.
Equipped with a flag switch, a quick-reset button and a holding ball.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
5.58€
Ex Tax:5.58€
Model: 39767
Mechanism with 45 teeth allows turning with 8 degrees minimum angle.
Shortened design allows the use ratchet in a limited space.
Equipped with a flag switch, a quick-reset button and a holding ball.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It ..
5.89€
Ex Tax:5.89€
Model: 39638
Tap wrench is made by cold stamping method.
Has a swivel head and a spring-loaded retaining ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
Wear-resistant, suitable for the long-term usage at max loads.
It is chrome plated and matt finish t..
5.99€
Ex Tax:5.99€
Model: 39734
Mechanism with 72 teeth allows to rotate by 5 degree minimum angle.
Equipped with a flag switch, a quick-reset button and a holding ball.
Telescopic rod design with a lock.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt ..
6.55€
Ex Tax:6.55€
Model: 39724
Mechanism with 72 teeth allows to rotate by 5 degree minimum angle.
Equipped with a flag switch, a quick-reset button and a holding ball.
Ratchet design allows to use the wrench in hard-to-reach places.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
..
6.61€
Ex Tax:6.61€
Model: 39769
Mechanism with 45 teeth allows turning with 8 degrees minimum angle.
Shortened design allows the use ratchet in a limited space.
Equipped with a flag switch, a quick-reset button and a holding ball.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It ..
6.68€
Ex Tax:6.68€
Model: 39540
Tap wrench is made by cold stamping method.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
7.12€
Ex Tax:7.12€
Model: 39484
Mechanism with 72 teeth allows to rotate by 5 degree minimum angle.
Equipped with a flag switch, a quick-reset button and a holding ball.
Made by cold stamping method.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finis..
7.71€
Ex Tax:7.71€
Model: 39484
Mechanism with 72 teeth allows to rotate by 5 degree minimum angle.
Equipped with a flag switch, a quick-reset button and a holding ball.
Made by cold stamping method.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finis..
7.71€
Ex Tax:7.71€
Model: 39768
Mechanism with 45 teeth allows turning with 8 degrees minimum angle.
Shortened design allows the use ratchet in a limited space.
Equipped with a flag switch, a quick-reset button and a holding ball.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It ..
8.04€
Ex Tax:8.04€
Model: 39768
Mechanism with 45 teeth allows turning with 8 degrees minimum angle.
Shortened design allows the use ratchet in a limited space.
Equipped with a flag switch, a quick-reset button and a holding ball.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It ..
8.04€
Ex Tax:8.04€
Model: 39754
Mechanism with 45 teeth allows turning with 8 degrees minimum angle.
Equipped with a flag switch, a quick-reset button and a holding ball.
Made by cold stamping method.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt fini..
9.09€
Ex Tax:9.09€