Model: 39722
Made by the method of cold stamping.
Equipped with a spring-loaded retaining ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39 HRC.
Protected from corrosion by chrome plating with matt surface effect...
0.38€
Ex Tax:0.38€
Model: 39614
Made by the method of cold stamping.
Equipped with a spring-loaded retaining ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39 HRC.
Protected from corrosion by chrome plating with matt surface effect...
0.51€
Ex Tax:0.51€
Model: 39761
Made by cold stamping method.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
0.62€
Ex Tax:0.62€
Model: 39723
Made by the method of cold stamping.
Equipped with a spring-loaded retaining ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39 HRC.
Protected from corrosion by chrome plating with matt surface effect...
0.69€
Ex Tax:0.69€
Model: 39627
Made by the method of cold stamping.
Equipped with a spring-loaded retaining ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39 HRC.
Protected from corrosion by chrome plating with matt surface effect...
0.77€
Ex Tax:0.77€
Model: 39714
Made by hot stamping (forging hammers).
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
0.78€
Ex Tax:0.78€
Model: 39762
Made by cold stamping method.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
0.85€
Ex Tax:0.85€
Model: 39762
Made by cold stamping method.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
0.85€
Ex Tax:0.85€
Model: 39771
Made by cold stamping method.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
0.85€
Ex Tax:0.85€
Model: 39678
Made by the method of cold stamping.
Equipped with a spring-loaded retaining ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39 HRC.
An additional hole allows to use a head with an appropriate extension cord as a T-handle.
Wear-resistant, suitable..
0.97€
Ex Tax:0.97€
Model: 39765
Made by cold stamping method.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
1.05€
Ex Tax:1.05€
Model: 39763
Made by cold stamping method.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
1.10€
Ex Tax:1.10€