Model: 39714
Made by hot stamping (forging hammers).
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
0.78€
Ex Tax:0.78€
Model: 39524
Tap wrench head is made by the cold stamping method and equipped with a spring-loaded retaining ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
Wear-resistant, suitable for the long-term usage at max loads.
It is chrome plated and matt fini..
0.99€
Ex Tax:0.99€
Model: 39636
Tap wrench is made by cold stamping method.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
Wear-resistant, suitable for the long-term usage at max loads.
It is chrome plated and matt finish to resist c..
1.19€
Ex Tax:1.19€
Model: 39743
• Tap wrench head is made by the cold stamping method and equipped with a spring-loaded retaining ball.
• Material - chrome-vanadium tool steel CrV50BV30.
• It is hardened to hardness not less than 39HRC.
• It is chrome plated and matt finish to resist corrosion...
1.25€
Ex Tax:1.25€
Model: 39751
Tap wrench is made by cold stamping method.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
1.27€
Ex Tax:1.27€
Model: 39538
Made by hot stamping (forging hammers).
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
1.47€
Ex Tax:1.47€
Model: 39758
Tap wrench is made by cold stamping method.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
1.72€
Ex Tax:1.72€
Model: 39701
Tap wrench is made by cold stamping method.
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
2.15€
Ex Tax:2.15€
Model: 39704
• Tap wrench head is made by the cold stamping method and equipped with a spring-loaded retaining ball.
• Material - chrome-vanadium tool steel CrV50BV30.
• It is hardened to hardness not less than 39HRC.
• It is chrome plated and matt finish to resist corrosion...
2.57€
Ex Tax:2.57€
Model: 39666
Used to restore the functionality of the mechanism of the ratchet with 72 teeth.
Contains a complete set of the ratchet mechanism.
The drive sprocket and mechanism flags are made of tool steel alloyed with chrome and molybdenum.
Wear-resistant, suitable for long-term use at max loads...
2.70€
Ex Tax:2.70€
Model: 39757
• Tap wrench head is made by the cold stamping method and equipped with a spring-loaded retaining ball.
• Material - chrome-vanadium tool steel CrV50BV30.
• It is hardened to hardness not less than 39HRC.
• It is chrome plated and matt finish to resist corrosion...
2.76€
Ex Tax:2.76€
Model: 39512
Made by hot stamping (forging hammers).
Equipped with a spring-loaded holding ball.
Material - chrome-vanadium tool steel CrV50BV30.
It is hardened to hardness not less than 39HRC.
It is chrome plated and matt finish to resist corrosion...
2.76€
Ex Tax:2.76€