Model: 40634
Inserts are made by the cold stamping method of the S2 tool steel, hardened to 55-60 HRC and protected from corrosion by phosphatizing.
External 12-point Spline inserts working profile.
Inserts length - 30 mm.
Bits operating size - М5, М6, М8, М10, М12.
Individual packaging - a blister...
1.73€
Ex Tax:1.73€
Model: 40647
The inserts are cold stamped from chrome vanadium tool steel, hardened to a hardness of 55-60 HRC and protected against corrosion by phosphating.
Working profile - external Hex.
Inserts length - 30 mm.
Bits operating size - Н4, Н5, Н6, Н8, Н10, Н12.
The kit is equipped with an adapter from a 1/..
2.16€
Ex Tax:2.16€
Model: 40646
The inserts are cold stamped from chrome-vanadium tool steel, hardened to a hardness of 55-60 HRC and protected from corrosion by phosphating.
External 12-point Spline inserts working profile.
Inserts length - 30 mm.
Bits operating size - М5, М6, М8, М10, М12.
In the set adapter from square 1/2"..
2.16€
Ex Tax:2.16€
Model: 40642
The inserts are cold stamped from chrome-vanadium tool steel, hardened to a hardness of 55-60 HRC and protected from corrosion by phosphating.
Working profile of inserts - external Torx® with hole.
Inserts length - 30 mm.
Bits operating size - Т20, Т25, Т30, Т40, Т45, Т50.
In the set adapter fro..
2.65€
Ex Tax:2.65€
Model: 40635
Inserts are made by the cold stamping method of the S2 tool steel, hardened to 55-60 HRC and protected from corrosion by phosphatizing.
External 12-point Spline inserts working profile.
Inserts length - 75 mm.
Bits operating size - М5, М6, М8, М10, М12.
Individual packaging - a blister...
4.21€
Ex Tax:4.21€
Model: 40641
The inserts are cold stamped from chrome-vanadium tool steel, hardened to a hardness of 55-60 HRC and protected from corrosion by phosphating.
External 12-point Spline inserts working profile.
Inserts length - 30 mm and 75 mm.
Bits operating size - М5, М6, М8, М10, М12.
In the set adapter from s..
5.36€
Ex Tax:5.36€
Model: 40640
The inserts are cold stamped from chrome-vanadium tool steel, hardened to a hardness of 55-60 HRC and protected from corrosion by phosphating.
Set includes a wide range of the inserts with working profiles Torx®, Spline and hex.
Inserts length - 30 mm and 75 mm.
Torx® Bits operating size - Т20, Т..
8.45€
Ex Tax:8.45€
Model: 40645
The inserts are cold stamped from chrome vanadium tool steel, hardened to a hardness of 55-60 HRC and protected against corrosion by phosphating.
Working profile - external Hex.
Inserts length - 30 mm and 75 mm.
Bits operating size - Н4, Н5, Н6, Н7, Н8, Н10, Н12.
The kit is equipped with an adap..
8.85€
Ex Tax:8.85€
Model: 40643
Bits are made from S2 tool steel by the cold stamping method with subsequent hardening to 55-60 HRC and protected from corrosion by phosphatizing.
Set is ideally suited for works with an electric screwdriver and equipped with magnetic adapter with an insert fixing system...
9.25€
Ex Tax:9.25€
Model: 39600
Working profile - external Torx®.
Individual packaging - plastic case...
12.55€
Ex Tax:12.55€
Model: 39840
Working profile - internal Torx®.
Working profile - external Torx®.
Individual packaging - plastic case...
17.55€
Ex Tax:17.55€