Fuel system

Made by cold stamping method. Material – chrome-vanadium tool steel. Has 6-point socket. Has a hole for the tap wrench with diameter 8 mm. Protected from corrosion by chemical oxidation...

Intended for removal of the fuel filter of diesel engines. Has a split design of the working part with a size 27 mm and a standard square drive 1/2" (12.5 mm) for the tap wrench. Is used for HDi 2,0/2,2 engines of Citroen C4 and C5; Fiat Scudo, Ulysse 2,0 JTD; Ford Focus, Galaxy, Kuga 2,0 TDCi; Pe..

Intended for removal of the fuel filter of diesel engines. Has a split design of the working part with a size 27 mm and a standard square drive 1/2" (12.5 mm) for the tap wrench. Is used for HDi 2,0/2,2 engines of Citroen C4 and C5; Fiat Scudo, Ulysse 2,0 JTD; Ford Focus, Galaxy, Kuga 2,0 TDCi; Pe..

It is used to clean the seats of Bosch and Delphi fuel injectors for HDI engines, direct injection diesel engines and engines with a Common rail system. Comes with a brush 300 mm long with a working part size of 100x8.5 mm and a brush 85 mm long with a working part of 25x19.5 mm. Comes stored an..

It is used to clean the seats of Bosch and Delphi fuel injectors for HDI engines, direct injection diesel engines and engines with a Common rail system. Comes with a brush 300 mm long with a working part size of 100x8.5 mm and a brush 85 mm long with a working part of 25x19.5 mm. Comes stored an..

Designed to control the pressure in fuel injection systems of VAZ vehicles injector engines. Manometer with a diameter 62 mm is protected by a rubber cover and has a measurement limit 6 kgf/cm². Equipped with a rubber hose 300 mm length and threaded tip for connection to the Schroeder port. Threa..

Intended for dismantling and installation of oxygen sensors. 6-point socket has slotted design. Equipped with a standard square drive 1/2" (12.5 mm) for the tap wrench. Made of chrome vanadium tool steel by cold stamping. Protected against corrosion by phosphatizing. Comes stored and orginized ..

Intended for dismantling and installation of oxygen sensors. 6-point socket has slotted design. Equipped with a standard square drive 1/2" (12.5 mm) for the tap wrench. Made of chrome vanadium tool steel by cold stamping. Protected against corrosion by phosphatizing. Comes stored and orginized ..

Intended for dismantling and installation of oxygen sensors. 6-point socket has slotted design. Equipped with a standard square drive 3/8" (9.5 mm) for the tap wrench. Made of chrome vanadium tool steel by cold stamping. Protected against corrosion by phosphatizing. Comes stored and orginized ..

Intended for dismantling and installation of oxygen sensors. 6-point socket has slotted design. Equipped with a standard square drive 3/8" (9.5 mm) for the tap wrench. Made of chrome vanadium tool steel by cold stamping. Protected against corrosion by phosphatizing. Comes stored and orginized ..

For easy attachment of flexible hoses...

Designed to control the pressure in fuel injection systems of VAZ vehicles injector engines. Manometer with a diameter 62 mm is protected by a rubber cover and has a measurement limit 6 kgf/cm². Equipped with a rubber hose 300 mm length and threaded tip for connection to the Schroeder port. Threa..