Sets of inserts

Inserts are made by the cold stamping method of the S2 tool steel, hardened to 55-60 HRC and protected from corrosion by phosphatizing. External 12-point Spline inserts working profile. Inserts length - 30 mm. Bits operating size - М5, М6, М8, М10, М12. Individual packaging - a blister...

The inserts are cold stamped from chrome vanadium tool steel, hardened to a hardness of 55-60 HRC and protected against corrosion by phosphating. Working profile - external Hex. Inserts length - 30 mm. Bits operating size - Н4, Н5, Н6, Н8, Н10, Н12. The kit is equipped with an adapter from a 1/..

The inserts are cold stamped from chrome-vanadium tool steel, hardened to a hardness of 55-60 HRC and protected from corrosion by phosphating. External 12-point Spline inserts working profile. Inserts length - 30 mm. Bits operating size - М5, М6, М8, М10, М12. In the set adapter from square 1/2"..

The inserts are cold stamped from chrome-vanadium tool steel, hardened to a hardness of 55-60 HRC and protected from corrosion by phosphating. Working profile of inserts - external Torx® with hole. Inserts length - 30 mm. Bits operating size - Т20, Т25, Т30, Т40, Т45, Т50. In the set adapter fro..

Inserts are made by the cold stamping method of the S2 tool steel, hardened to 55-60 HRC and protected from corrosion by phosphatizing. External 12-point Spline inserts working profile. Inserts length - 75 mm. Bits operating size - М5, М6, М8, М10, М12. Individual packaging - a blister...

The inserts are cold stamped from chrome-vanadium tool steel, hardened to a hardness of 55-60 HRC and protected from corrosion by phosphating. External 12-point Spline inserts working profile. Inserts length - 30 mm and 75 mm. Bits operating size - М5, М6, М8, М10, М12. In the set adapter from s..

The inserts are cold stamped from chrome-vanadium tool steel, hardened to a hardness of 55-60 HRC and protected from corrosion by phosphating. Set includes a wide range of the inserts with working profiles Torx®, Spline and hex. Inserts length - 30 mm and 75 mm. Torx® Bits operating size - Т20, Т..

The inserts are cold stamped from chrome vanadium tool steel, hardened to a hardness of 55-60 HRC and protected against corrosion by phosphating. Working profile - external Hex. Inserts length - 30 mm and 75 mm. Bits operating size - Н4, Н5, Н6, Н7, Н8, Н10, Н12. The kit is equipped with an adap..

Bits are made from S2 tool steel by the cold stamping method with subsequent hardening to 55-60 HRC and protected from corrosion by phosphatizing. Set is ideally suited for works with an electric screwdriver and equipped with magnetic adapter with an insert fixing system...

Working profile - external Torx®. Individual packaging - plastic case...

Individual packaging - plastic case...

Working profile - internal Torx®. Working profile - external Torx®. Individual packaging - plastic case...